127410, Российская Федерация, Москва, Алтуфьевское ш., д.41А, email: info@expertnk.ru
+7(495) 660 94 49 (многоканальный номер)
8 (800) 250 94 49 (бесплатный для регионов)
+7(495) 660 94 49 (многоканальный номер)
8 (800) 250 94 49 (бесплатный для регионов)
- Certification Of Specialists
- Laboratory Accreditation
- NDT Devices & Means
- Calibration Of NDT Funds
Преобразователи
Используются совместно с ультразвуковыми дефектоскопами или толщиномерами. Наличие большого выбора основных технических параметров (угол, частота, габариты и материал изготовления призмы) позволяет проводить контроль фактически при любых внешних условиях, включая высокую температуру контролируемой поверхности.
Filters
on order
Direct combined transducer SC1220
Code: 15485
Ceramic protective surface. Frequency 1.25 MHz, piezoelectric element diameter 20 mm.191 BrBuy
on order
Direct combined transducer SC1820
Code: 15385
Ceramic protective surface. Frequency 1.8 MHz, diameter of the piezoelectric element 20 mm.191 BrBuy
on order
Direct combined transducer SC2520
Code: 15185
Ceramic protective surface. Frequency 2.5 MHz, diameter of the piezoelectric element 20 mm.191 BrBuy
on order
Direct combined transducer SC5020
Code: 15285
Ceramic protective surface. Frequency 5 MHz, piezoelectric element diameter 20 mm.191 BrBuy
on order
Direct combined transducer SC1212
Code: 15483
Ceramic protective surface. Frequency 1.25 MHz, piezoelectric element diameter 12 mm.179 BrBuy
on order
Direct combined transducer SC1812
Code: 15383
Ceramic protective surface. Frequency 1.8 MHz, piezoelectric element diameter 12 mm.179 BrBuy
on order
Direct combined transducer SC2512
Code: 15183
Ceramic protective surface. Frequency 2.5 MHz, piezoelectric element diameter 12 mm.179 BrBuy
on order
Direct combined transducer SC5012
Code: 15283
Ceramic protective surface. Frequency 5 MHz, piezoelectric element diameter 12 mm.179 BrBuy
on order
Direct combined transducer SC5006
Code: 15282
Ceramic protective surface. Frequency 5 MHz, piezoelectric element diameter 6 mm.179 BrBuy
on order
Direct combined transducer SC1006
Code: 15982
Ceramic protective surface. Frequency 10 MHz, piezoelectric element diameter 6 mm.179 BrBuy
on order
Direct combined transducer SF1024
Code: 25741
Ceramic protective surface. Frequency 1 MHz, piezoelectric element diameter 24 mm.539 BrBuy
on order
Direct combined transducer SF1220
Code: 22474
Ceramic protective surface. Frequency 1.25 MHz, piezoelectric element diameter 20 mm.254 BrBuy
on order
Direct combined transducer SF1225
Code: 22494
Ceramic protective surface. Frequency 1.25 MHz, piezoelectric element diameter 25 mm.295 BrBuy
on order
Direct combined transducer SF1212
Code: 22404
Ceramic protective surface. Frequency 1.25 MHz, piezoelectric element diameter 12 mm.199 BrBuy
on order
Direct combined transducer SF1820
Code: 22471
Ceramic protective surface. Frequency 1.8 MHz, diameter of the piezoelectric element 20 mm.254 BrBuy
on order
Direct combined transducer SF2520
Code: 22472
Ceramic protective surface. Frequency 2.5 MHz, diameter of the piezoelectric element 20 mm.254 BrBuy
on order
Direct combined transducer SF5020
Code: 22473
Ceramic protective surface. Frequency 5 MHz, piezoelectric element diameter 20 mm.254 BrBuy
on order
Direct combined transducer SF1812
Code: 22401
Ceramic protective surface. Frequency 1.8 MHz, piezoelectric element diameter 12 mm.199 BrBuy
on order
Direct combined transducer SF2512
Code: 22402
Ceramic protective surface. Frequency 2.5 MHz, piezoelectric element diameter 12 mm.199 BrBuy
on order
Direct combined transducer SF5012
Code: 22403
Ceramic protective surface. Frequency 5 MHz, piezoelectric element diameter 12 mm.199 BrBuy
on order
Direct combined transducer SX5006
Code: 15285
Ceramic protective surface. Frequency 5 MHz, piezoelectric element diameter 6 mm.199 BrBuy
on order
Direct combined transducer SX1006
Code: 15985
Ceramic protective surface. Frequency 10 MHz, piezoelectric element diameter 6 mm.199 BrBuy
in stock
Direct combined transducer P111Low-frequency, with a metallized surface and a piezo element diameter of 26 mm. For shadow control mode.
P111-0,04-M26 (Code: 61901)
P111-0,06-M26 (Code: 61902)
P111-0,08-M26 (Code: 61903)
P111-0,1-M26 (Code: 61904)
P111-0,2-M26 (Code: 61905)
P111-0,4-M26 (Code: 61906)
from 576 BrExplore
on order
Combined transducer S3567 2.5A0D10CL
Code: 1461
Frequency: 2.5 MHz. Used in thickness measurement. For thickness gauges AKC.339 BrBuy
on order
Combined transducer S3568 2.5A0D10CL
Code: 1462
Frequency: 2.5 MHz. It is used in defectoscopy. For flaw detectors AKC.339 BrBuy
on order
Combined transducer S3469 1.8A0D18CL
Code: 1465
Frequency: 1.8 MHz. It is used in defectoscopy. For flaw detectors AKC.424 BrBuy
on order
Combined transducer S3466 1.2A0D18CL
Code: 1464
Frequency: 1.25 MHz. It is used in defectoscopy. For flaw detectors AKc.424 BrBuy
on order
Combined transducer S3373 5.0A0D8CL
Code: 1467
Frequency: 5.0 MHz. It is used in thickness measurement and flaw detection. For flaw detectors and thickness gauges AKC.424 BrBuy
on order
Combined transducer S3460 2.5A0D18CL
Code: 1468
Frequency: 2.5 MHz. It is used in flaw detection. For flaw detectors AKS (P111-2.5-18).424 BrBuy
on order
Combined transducer S3569 5.0A0D10CL
Code: 1466
Frequency: 5.0 MHz. It is used in thickness measurement and flaw detection. For AKC devices.424 BrBuy
on order
Combined transducer S3740 0.25A0D30CL
Code: 1469
Frequency: 0.25 MHz. It is used in thickness measurement and flaw detection. For AKC devices.1 187 BrBuy
on order
Combined transducer S3745 0.5A0D30CL
Code: 1470
Frequency: 0.5 MHz. It is used in thickness measurement and flaw detection. For AKC devices.1 187 BrBuy
on order
Combined transducer S3750 1.0A0D30CL
Code: 1463
Frequency: 1.0 MHz. It is used in thickness measurement and flaw detection. For AKC devices.1 187 BrBuy
on order
Direct combined transducer ST2512
Code: 22983
Broadband with ceramic protective surface. Frequency 2.5 MHz, piezoelectric element diameter 12 mm (P111-2.5-K12-005). Analog S3567.254 BrBuy
on order
Direct dual-coupler transducer DF1006
Code: 24421
For flaw detection of thin-walled products or surface layers of products, frequency 10 MHz, piezoelectric element size ∅6/2 mm (P112-10-6/2).216 BrBuy
on order
Direct dual-coupler transducer DF1044
Code: 24815
For flaw detection of complex-shaped products, frequency 10 MHz, piezoelectric element size 4x4 mm (P112-10-4x4).200 BrBuy
on order
Direct dual-coupler transducer DF1220
Code: 27481
For flaw detection, frequency 1.25 MHz, piezoelectric element diameter 20 mm (P112-1.25-20/2).269 BrBuy
on order
Direct dual-coupler transducer DF1820
Code: 27381
For defectoscopy. Frequency 1.8 MHz, diameter of the piezoelectric element 20 mm.269 BrBuy
on order
Direct dual-coupler transducer DF1812
Code: 24311
For defectoscopy. Frequency 1.8 MHz, diameter of the piezoelectric element 12 mm.216 BrBuy
on order
Direct dual-coupler transducer DF2011K
Code: 25221
For defectoscopy. Frequency 2 MHz, piezoelectric element diameter 11/2 mm.360 BrBuy
on order
Direct dual-coupler transducer DF20187K
Code: 25228
For defectoscopy. Frequency 2 MHz, piezoelectric element size 18x7 mm (P112-2-18x7-SEB2).539 BrBuy
on order
Direct dual-coupler transducer DF2520
Code: 27181
For defectoscopy. Frequency 2.5 MHz, piezoelectric element diameter 20 mm.269 BrBuy
on order
Direct dual-coupler transducer DF2510
Code: 24112
For defectoscopy. Frequency 2.5 MHz, piezoelectric element diameter 12 mm (P112-2.5-10/2).216 BrBuy
on order
Direct dual-coupler transducer DF2512
Code: 24111
For defectoscopy. Frequency 2.5 MHz, piezoelectric element diameter 12 mm (P112-2.5-12/2).216 BrBuy
on order
Direct dual-coupler transducer DF25728
Code: 24602
For defectoscopy. Frequency 2.5 MHz, piezoelectric element size 7x28 mm (P112-2.5-7x28).806 BrBuy
on order
Direct dual-coupler transducer DF40103K
Code: 25241
For defectoscopy. Frequency 4 MHz, piezoelectric element size 3x10 mm.539 BrBuy
on order
Direct dual-coupler transducer DF5012
Code: 24211
For defectoscopy. Frequency 5 MHz, piezoelectric element diameter 12 mm.216 BrBuy
on order
Direct dual-coupler transducer DF5010
Code: 24212
For defectoscopy. Frequency 5 MHz, piezoelectric element diameter 10 mm (P112-5-10/2).216 BrBuy
on order
Direct dual-coupler transducer DF5020
Code: 27281
For defectoscopy. Frequency 5 MHz, piezoelectric element diameter 20 mm.269 BrBuy
on order
Direct dual-coupler transducer DF5006
Code: 24211
For defectoscopy. Frequency 5 MHz, piezoelectric element diameter 6/2 mm (P112-5-6/2).216 BrBuy
on order
Direct dual-coupler transducer DTB1044
Code: 27532
For thickness measurement of thin-walled products or surface layers of products. The frequency is 10 MHz, the size of the piezoelectric elements is 4x4 mm (P112-10-4x4).232 BrBuy
on order
Direct dual-coupler transducer DTB2512
Code: 27115
For thickness measurement. Frequency 2.5 MHz, piezoelectric element diameter 12 mm.232 BrBuy
on order
Direct dual-coupler transducer DTB5012
Code: 27215
For thickness measurement. Frequency 5 MHz, piezoelectric element diameter 12 mm.232 BrBuy
on order
Direct dual-coupler transducer DT5006
Code: 27221
For thickness measurement. Frequency 5 MHz, piezoelectric element diameter 6 mm.232 BrBuy
on order
Direct dual-coupler transducer DT1006
Code: 27521
For thickness measurement. Frequency 10 MHz, piezoelectric element diameter 6 mm.232 BrBuy
on order
Direct dual-coupler transducer DT5010SFor thickness measurement. Frequency 5 MHz, piezoelectric element diameter 10 mm (P112-5-10/2-A).
232 BrBuy
on order
Direct dual-coupler transducer DTB5044
Code: 27232
For thickness measurement. Frequency 5 MHz, piezoelectric element size 4x4 mm.232 BrBuy
on order
High temperature direct dual element transducer P112For thickness measurement. High temperature. Object temperature up to 250°C, briefly up to 350°C.
P112-2,5-12/2-Т (Code: 24841)
P112-5-10/2-Т (Code: 24843)
from 566 BrExplore
on order
Direct dual-coupler transducer DT1004 (P112-10-4/2)
Code: 24830
For thickness measurement. Frequency 10 MHz, piezoelectric element diameter 4 mm (P112-10-4/2).368 BrBuy
on order
Miniature dual-coupler transducer DTC1023
Code: 27901
For thickness measurement. Frequency 10 MHz, Measurement range from 0.4 mm.411 BrBuy
on order
High temperature direct dual-coupler transducer P112-5-12/2-ATB-902 (DTT5012)
Code: 1454
High-temperature converter for AKC devices.721 BrBuy
on order
High temperature direct dual-coupler transducer P112-10-6/2-T
Code: 24844
High-temperature. Frequency 10 MHz, piezoelectric element diameter 6/2 mm, object temperature up to 350°C.566 BrBuy
on order
Small-sized dual-combination transducer P112-10-6/2-Lemo
Code: 24832
Small-sized. Frequency 10 MHz, piezoelectric element diameter 6/2 mm, control range from 0.6 to 30 mm.368 BrBuy
on order
Small-sized dual-combination transducer P112-10-6/2-CP
Code: 24833
Small-sized. Frequency 10 MHz, piezoelectric element diameter 6/2 mm, control range from 0.6 to 30 mm.368 BrBuy
on order
Inclined combined transducer ALB2540
Code: 15711
Frequency: 2.5 MHz. Entry angle 40°. The size of the piezoceramic element is 8x10 mm (P121-2.5-40-A-004).191 BrBuy
on order
Inclined combined transducer ALB2545
Code: 15712
Frequency: 2.5 MHz. Entry angle 45°. The size of the piezoceramic element is 8x10 mm (P121-2.5-45-A-004).191 BrBuy
on order
Inclined combined transducer ALB2550
Code: 15713
Frequency: 2.5 MHz. Entry angle 50°. The size of the piezoceramic element is 8x10 mm (P121-2.5-50-A-004).191 BrBuy
on order
Inclined combined transducer ALB2555
Code: 15714
Frequency: 2.5 MHz. Entry angle 55°. The size of the piezoceramic element is 8x10 mm (P121-2.5-55-A-004).191 BrBuy
on order
Large-sized inclined combined transducer ANR1240
Marking according to GOST: P121-1.25-40-A-005.
Code: 19411
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 40°.Marking according to GOST: P121-1.25-40-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1245
Marking according to GOST: P121-1.25-45-A-005.
Code: 19412
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 45°.Marking according to GOST: P121-1.25-45-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1250
Marking according to GOST: P121-1.25-50-A-005.
Code: 19413
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 50°.Marking according to GOST: P121-1.25-50-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1255
Marking according to GOST: P121-1.25-55-A-005.
Code: 19414
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 55°.Marking according to GOST: P121-1.25-55-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1260
Marking according to GOST: P121-1.25-60-A-005.
Code: 19415
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 60°.Marking according to GOST: P121-1.25-60-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1265
Marking according to GOST: P121-1.25-65-A-005.
Code: 19416
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 65°.Marking according to GOST: P121-1.25-65-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1270
Marking according to GOST: P121-1.25-70-A-005.
Code: 19417
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 70°.Marking according to GOST: P121-1.25-70-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1290
Marking according to GOST: P121-1.25-90-A-005.
Code: 19419
Frequency 1.25 MHz, piezoelectric element size 16x12 mm, input angle 90°.Marking according to GOST: P121-1.25-90-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1840
Marking according to GOST: P121-1.8-40-A-005.
Code: 19311
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 40°.Marking according to GOST: P121-1.8-40-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1845
Marking according to GOST: P121-1.8-45-A-005.
Code: 19312
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 45°.Marking according to GOST: P121-1.8-45-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1850
Marking according to GOST: P121-1.8-50-A-005.
Code: 19313
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 50°.Marking according to GOST: P121-1.8-50-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1855
Marking according to GOST: P121-1.8-55-A-005.
Code: 19314
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 55°.Marking according to GOST: P121-1.8-55-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1860
Marking according to GOST: P121-1.8-60-A-005.
Code: 19315
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 60°.Marking according to GOST: P121-1.8-60-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1865
Marking according to GOST: P121-1.8-65-A-005.
Code: 19316
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 65°.Marking according to GOST: P121-1.8-65-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1870
Marking according to GOST: P121-1.8-70-A-005.
Code: 19317
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 70°.Marking according to GOST: P121-1.8-70-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR1890
Marking according to GOST: P121-1.8-90-A-005.
Code: 19319
Frequency 1.8 MHz, piezoelectric element size 16x12 mm, input angle 90°.Marking according to GOST: P121-1.8-90-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2540
Marking according to GOST: P121-2.5-40-A-005.
Code: 19111
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 40°.Marking according to GOST: P121-2.5-40-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2545
Marking according to GOST: P121-2.5-45-A-005.
Code: 19112
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 45°.Marking according to GOST: P121-2.5-45-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2550
Marking according to GOST: P121-2.5-50-A-005.
Code: 19113
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 50°.Marking according to GOST: P121-2.5-50-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2555
Marking according to GOST: P121-2.5-55-A-005.
Code: 19114
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 55°.Marking according to GOST: P121-2.5-55-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2560
Marking according to GOST: P121-2.5-60-A-005.
Code: 19115
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 60°.Marking according to GOST: P121-2.5-60-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2565
Marking according to GOST: P121-2.5-65-A-005.
Code: 19116
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 65°.Marking according to GOST: P121-2.5-65-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2570
Marking according to GOST: P121-2.5-70-A-005.
Code: 19117
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 70°.Marking according to GOST: P121-2.5-70-A-005.
191 BrBuy
on order
Large-sized inclined combined transducer ANR2590
Marking according to GOST: P121-2.5-90-A-005.
Code: 19119
Frequency 2.5 MHz, piezoelectric element size 16x12 mm, input angle 90°.Marking according to GOST: P121-2.5-90-A-005.
191 BrBuy
on order
Subminiature inclined coupled transducer AW5040
Marking according to GOST: P121-5-40-MK.
Code: 25721
Frequency 5 MHz, piezoelectric element size 4x4 mm, input angle 40°.Marking according to GOST: P121-5-40-MK.
265 BrBuy
on order
Subminiature inclined coupled transducer AW5050
Marking according to GOST: P121-5-50-MK.
Code: 25723
Frequency 5 MHz, piezoelectric element size 4x4 mm, input angle 50°.Marking according to GOST: P121-5-50-MK.
265 BrBuy
on order
Subminiature inclined coupled transducer AW5060
Marking according to GOST: P121-5-60-MK.
Code: 25725
Frequency 5 MHz, piezoelectric element size 4x4 mm, input angle 60°.Marking according to GOST: P121-5-60-MK.
265 BrBuy
on order
Subminiature inclined coupled transducer AW5065
Marking according to GOST: P121-5-65-MK.
Code: 25726
Frequency 5 MHz, piezoelectric element size 4x4 mm, input angle 65°.Marking according to GOST: P121-5-65-MK.
265 BrBuy
on order
Subminiature inclined coupled transducer AW5070
Marking according to GOST: P121-5-70-MK.
Code: 25727
Frequency 5 MHz, piezoelectric element size 4x4 mm, input angle 70°.Marking according to GOST: P121-5-70-MK.
265 BrBuy
on order
Subminiature inclined coupled transducer AW5075
Marking according to GOST: P121-5-75-MK.
Code: 25728
Frequency 5 MHz, piezoelectric element size 4x4 mm, input angle 75°.Marking according to GOST: P121-5-75-MK.
265 BrBuy
on order
Subminiature inclined coupled transducer AW5090
Marking according to GOST: P121-5-90-MK.
Code: 25729
Frequency 5 MHz, piezoelectric element size 4x4 mm, input angle 90°.Marking according to GOST: P121-5-90-MK.
265 BrBuy
on order
Small-sized inclined combined transducer AN5040
Marking according to GOST: P121-5-40-M.
Code: 22201
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°.Marking according to GOST: P121-5-40-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5045
Marking according to GOST: P121-5-45-M.
Code: 22202
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 45°.Marking according to GOST: P121-5-45-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5050
Marking according to GOST: P121-5-50-M.
Code: 22203
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°.Marking according to GOST: P121-5-50-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5055
Marking according to GOST: P121-5-55-M.
Code: 22204
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 55°.Marking according to GOST: P121-5-55-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5060
Marking according to GOST: P121-5-60-M.
Code: 22205
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 60°.Marking according to GOST: P121-5-60-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5065
Marking according to GOST: P121-5-65-M.
Code: 22206
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°.Marking according to GOST: P121-5-65-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5070
Marking according to GOST: P121-5-70-M.
Code: 22207
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°.Marking according to GOST: P121-5-70-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5075
Marking according to GOST: P121-5-75-M.
Code: 22208
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 75°.Marking according to GOST: P121-5-75-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5090
Marking according to GOST: P121-5-90-M.
Code: 25729
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 90°.Marking according to GOST: P121-5-90-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN5008L
Marking according to GOST: P121-5-8-PR.
Code: 22211
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 8°.Marking according to GOST: P121-5-8-PR.
180 BrBuy
on order
Small-sized inclined combined transducer AN5020L
Marking according to GOST: P121-5-20-PR.
Code: 22215
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 20°.Marking according to GOST: P121-5-20-PR.
180 BrBuy
on order
Small-sized inclined combined transducer AN1840
Marking according to GOST: P121-1.8-40-M.
Code: 22301
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 40°.Marking according to GOST: P121-1.8-40-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN1845
Marking according to GOST: P121-1.8-45-M.
Code: 22302
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 45°.Marking according to GOST: P121-1.8-45-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN1850
Marking according to GOST: P121-1.8-50-M.
Code: 22303
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 50°.Marking according to GOST: P121-1.8-50-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN1855
Marking according to GOST: P121-1.8-55-M.
Code: 22304
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 55°.Marking according to GOST: P121-1.8-55-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN1860
Marking according to GOST: P121-1.8-60-M.
Code: 22305
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 60°.Marking according to GOST: P121-1.8-60-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN1865
Marking according to GOST: P121-1.8-65-M.
Code: 22306
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 65°.Marking according to GOST: P121-1.8-65-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN1870
Marking according to GOST: P121-1.8-70-M.
Code: 22307
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 70°.Marking according to GOST: P121-1.8-70-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN1890
Marking according to GOST: P121-1.8-90-M.
Code: 22309
Frequency 1.8 MHz, piezoelectric element size 8x9 mm, input angle 90°.Marking according to GOST: P121-1.8-90-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2540
Marking according to GOST: P121-2.5-40-M.
Code: 22101
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°.Marking according to GOST: P121-2.5-40-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2545
Marking according to GOST: P121-2.5-45-M.
Code: 22102
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 45°.Marking according to GOST: P121-2.5-45-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2550
Marking according to GOST: P121-2.5-50-M.
Code: 22103
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 50°.Marking according to GOST: P121-2.5-50-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2555
Marking according to GOST: P121-2.5-55-M.
Code: 22104
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 55°.Marking according to GOST: P121-2.5-55-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2560
Marking according to GOST: P121-2.5-60-M.
Code: 22105
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 60°.Marking according to GOST: P121-2.5-60-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2565
Marking according to GOST: P121-2.5-60-M.
Code: 22106
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 60°.Marking according to GOST: P121-2.5-60-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2570
Marking according to GOST: P121-2.5-70-M.
Code: 22107
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 70°.Marking according to GOST: P121-2.5-70-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2575
Marking according to GOST: P121-2.5-75-M.
Code: 22108
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 75°.Marking according to GOST: P121-2.5-75-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN2590
Marking according to GOST: P121-2.5-90-M.
Code: 22109
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 90°.Marking according to GOST: P121-2.5-90-M.
180 BrBuy
on order
Miniature inclined combined transducer AM1040
Marking according to GOST: P121-10-40-M.
Code: 21501
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 40°.Marking according to GOST: P121-10-40-M.
191 BrBuy
on order
Miniature inclined combined transducer AM1045
Marking according to GOST: P121-10-45-M.
Code: 21502
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 45°.Marking according to GOST: P121-10-45-M.
191 BrBuy
on order
Miniature inclined combined transducer AM1050
Marking according to GOST: P121-10-50-M.
Code: 21503
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 50°.Marking according to GOST: P121-10-50-M.
191 BrBuy
on order
Miniature inclined combined transducer AM1055
Marking according to GOST: P121-10-55-M.
Code: 21504
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 55°.Marking according to GOST: P121-10-55-M.
191 BrBuy
on order
Miniature inclined combined transducer AM1060
Marking according to GOST: P121-10-60-M.
Code: 21505
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 60°.Marking according to GOST: P121-10-60-M.
191 BrBuy
on order
Miniature inclined combined transducer AM1065
Marking according to GOST: P121-10-65-M.
Code: 21506
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 65°.Marking according to GOST: P121-10-65-M.
191 BrBuy
on order
Miniature inclined combined transducer AM1070
Marking according to GOST: P121-10-70-M.
Code: 21507
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 70°.Marking according to GOST: P121-10-70-M.
191 BrBuy
on order
Miniature inclined combined transducer AM1075
Marking according to GOST: P121-10-75-M.
Code: 21508
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 75°.Marking according to GOST: P121-10-75-M.
191 BrBuy
on order
Miniature inclined coupled transducer AM1090
Marking according to GOST: P121-10-90-M.
Code: 21509
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 90°.Marking according to GOST: P121-10-90-M.
191 BrBuy
on order
Inclined combined transducer ANB1840
Marking according to GOST: P121-1.8-40-A-002.
Code: 15311
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 40°.Marking according to GOST: P121-1.8-40-A-002.
180 BrBuy
on order
Inclined coupled transducer ANB1845
Marking according to GOST: P121-1.8-45-A-002.
Code: 15312
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 45°.Marking according to GOST: P121-1.8-45-A-002.
180 BrBuy
on order
Inclined coupled transducer ANB1850
Marking according to GOST: P121-1.8-50-A-002.
Code: 15313
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 50°.Marking according to GOST: P121-1.8-50-A-002.
180 BrBuy
on order
Inclined coupled transducer ANB1855
Marking according to GOST: P121-1.8-55-A-002.
Code: 15314
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 55°.Marking according to GOST: P121-1.8-55-A-002.
180 BrBuy
on order
Inclined coupled transducer ANB1860
Marking according to GOST: P121-1.8-60-A-002.
Code: 15315
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 60°.Marking according to GOST: P121-1.8-60-A-002.
180 BrBuy
on order
Inclined coupled transducer ANB1865
Marking according to GOST: P121-1.8-65-A-002.
Code: 15316
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 65°.Marking according to GOST: P121-1.8-65-A-002.
180 BrBuy
on order
Inclined coupled transducer ANB1870
Marking according to GOST: P121-1.8-70-A-002.
Code: 15317
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 70°.Marking according to GOST: P121-1.8-70-A-002.
180 BrBuy
on order
Angle-beam combined transducer ANB1890
Marking according to GOST: P121-1.8-90-A-002.
Code: 15319
Frequency 1.8 MHz, piezoelectric element size 9x12 mm, input angle 90°.Marking according to GOST: P121-1.8-90-A-002.
180 BrBuy
on order
Inclined coupled transducer ANB2540
Marking according to GOST: P121-2.5-40-A-001.
Code: 15111
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 40°.Marking according to GOST: P121-2.5-40-A-001.
180 BrBuy
on order
Inclined coupled transducer ANB2545
Marking according to GOST: P121-2.5-45-A-001.
Code: 15112
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 45°.Marking according to GOST: P121-2.5-45-A-001.
180 BrBuy
on order
Inclined coupled transducer ANB2550
Marking according to GOST: P121-2.5-50-A-001.
Code: 15113
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 50°.Marking according to GOST: P121-2.5-50-A-001.
180 BrBuy
on order
Inclined combined transducer ANB2555
Marking according to GOST: P121-2.5-55-A-001.
Code: 15114
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 55°.Marking according to GOST: P121-2.5-55-A-001.
180 BrBuy
on order
Inclined combined transducer ANB2560
Marking according to GOST: P121-2.5-60-A-001.
Code: 15115
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 60°.Marking according to GOST: P121-2.5-60-A-001.
180 BrBuy
on order
Inclined combined transducer ANB2565
Marking according to GOST: P121-2.5-65-A-001.
Code: 15116
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 65°.Marking according to GOST: P121-2.5-65-A-001.
180 BrBuy
on order
Inclined combined transducer ANB2570
Marking according to GOST: P121-2.5-70-A-001.
Code: 15117
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 70°.Marking according to GOST: P121-2.5-70-A-001.
180 BrBuy
on order
Inclined combined transducer ANB2575
Marking according to GOST: P121-2.5-75-A-001.
Code: 15118
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 75°.Marking according to GOST: P121-2.5-75-A-001.
180 BrBuy
on order
Angle-beam combined transducer ANB2590
Marking according to GOST: P121-2.5-90-A-001.
Code: 15119
Frequency 2.5 MHz, piezoelectric element size 8x10 mm, input angle 90°.Marking according to GOST: P121-2.5-90-A-001.
180 BrBuy
on order
Inclined combined transducer ALF5040Frequency 5 MHz, piezoelectric element size 12x16 mm, input angle 40°.
Marking according to GOST: P121-5-40-A-001.
Marking according to GOST: P121-5-40-A-001.
191 BrBuy
on order
Inclined combined transducer ALF5050Frequency 5 MHz, piezoelectric element size 12x16 mm, input angle 50°.
Marking according to GOST: P121-5-50-A-001.
Marking according to GOST: P121-5-50-A-001.
191 BrBuy
on order
Inclined combined transducer ALF5060Frequency 5 MHz, piezoelectric element size 12x16 mm, input angle 60°.
Marking according to GOST: P121-5-60-A-001.
Marking according to GOST: P121-5-60-A-001.
191 BrBuy
on order
Inclined combined transducer ALF5065Frequency 5 MHz, piezoelectric element size 12x16 mm, input angle 65°.
Marking according to GOST: P121-5-65-A-001.
Marking according to GOST: P121-5-65-A-001.
191 BrBuy
on order
Inclined combined transducer ALF5070Frequency 5 MHz, piezoelectric element size 12x16 mm, input angle 70°.
Marking according to GOST: P121-5-70-A-001.
Marking according to GOST: P121-5-70-A-001.
191 BrBuy
on order
Inclined combined transducer ALC2540
Marking according to GOST: P121-2.5-40-A-003.
Code: 22701
Frequency 2.5 MHz, piezoelectric element diameter 12 mm, input angle 40°.Marking according to GOST: P121-2.5-40-A-003.
191 BrBuy
on order
Inclined combined transducer ALC2545
Marking according to GOST: P121-2.5-45-A-003.
Code: 22702
Frequency 2.5 MHz, piezoelectric element diameter 12 mm, input angle 45°.Marking according to GOST: P121-2.5-45-A-003.
191 BrBuy
on order
Inclined combined transducer ALC2550
Marking according to GOST: P121-2.5-50-A-003.
Code: 22703
Frequency 2.5 MHz, piezoelectric element diameter 12 mm, input angle 50°.Marking according to GOST: P121-2.5-50-A-003.
191 BrBuy
on order
Inclined combined transducer ALC2555
Marking according to GOST: P121-2.5-55-A-003.
Code: 22704
Frequency 2.5 MHz, piezoelectric element diameter 12 mm, input angle 55°.Marking according to GOST: P121-2.5-55-A-003.
191 BrBuy
on order
Inclined combined transducer ALC2560
Marking according to GOST: P121-2.5-60-A-003.
Code: 22705
Frequency 2.5 MHz, piezoelectric element diameter 12 mm, input angle 60°.Marking according to GOST: P121-2.5-60-A-003.
191 BrBuy
on order
Inclined combined transducer ALC2565
Marking according to GOST: P121-2.5-65-A-003.
Code: 22706
Frequency 2.5 MHz, piezoelectric element diameter 12 mm, input angle 65°.Marking according to GOST: P121-2.5-65-A-003.
191 BrBuy
on order
Inclined combined transducer ALC2570
Marking according to GOST: P121-2.5-70-A-003.
Code: 22707
Frequency 2.5 MHz, piezoelectric element diameter 12 mm, input angle 70°.Marking according to GOST: P121-2.5-70-A-003.
191 BrBuy
on order
Small-sized inclined combined transducer AN2508L
Marking according to GOST: P121-2.5-8-PR.
Code: 22121
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 8°.Marking according to GOST: P121-2.5-8-PR.
180 BrBuy
on order
Small-sized inclined combined transducer AN2513L
Marking according to GOST: P121-2.5-13-PR.
Code: 22123
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 13°.Marking according to GOST: P121-2.5-13-PR.
180 BrBuy
on order
Small-sized inclined combined transducer AN2520L
Marking according to GOST: P121-2.5-20-PR.
Code: 22125
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 20°.Marking according to GOST: P121-2.5-20-PR.
180 BrBuy
on order
Small-sized inclined combined transducer AN2522L
Marking according to GOST: P121-2.5-22-PR.
Code: 22126
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 22°.Marking according to GOST: P121-2.5-22-PR.
180 BrBuy
on order
Small-sized inclined combined transducer AN2527L
Marking according to GOST: P121-2.5-27-PR.
Code: 22127
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 27°.Marking according to GOST: P121-2.5-27-PR.
180 BrBuy
on order
Miniature inclined combined transducer AM2540
Marking according to GOST: P121-2.5-40-M.
Code: 21101
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 40°.Marking according to GOST: P121-2.5-40-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2545
Marking according to GOST: P121-2.5-45-M.
Code: 21102
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 45°.Marking according to GOST: P121-2.5-45-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2550
Marking according to GOST: P121-2.5-50-M.
Code: 21103
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 50°.Marking according to GOST: P121-2.5-50-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2555
Marking according to GOST: P121-2.5-55-M.
Code: 21104
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 55°.Marking according to GOST: P121-2.5-55-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2560
Marking according to GOST: P121-2.5-60-M.
Code: 21105
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 60°.Marking according to GOST: P121-2.5-60-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2565
Marking according to GOST: P121-2.5-65-M.
Code: 21106
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 65°.Marking according to GOST: P121-2.5-65-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2570
Marking according to GOST: P121-2.5-70-M.
Code: 21107
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 70°.Marking according to GOST: P121-2.5-70-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2575
Marking according to GOST: P121-2.5-75-M.
Code: 21108
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 75°.Marking according to GOST: P121-2.5-75-M.
180 BrBuy
on order
Miniature inclined combined transducer AM2590
Marking according to GOST: P121-2.5-90-M.
Code: 21109
Frequency 2.5 MHz, piezoelectric element size 5x9 mm, input angle 90°.Marking according to GOST: P121-2.5-90-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5040
Marking according to GOST: P121-5-40-M.
Code: 21201
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 40°.Marking according to GOST: P121-5-40-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5045
Marking according to GOST: P121-5-45-M.
Code: 21202
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 45°.Marking according to GOST: P121-5-45-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5050
Marking according to GOST: P121-5-50-M.
Code: 21203
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 50°.Marking according to GOST: P121-5-50-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5055
Marking according to GOST: P121-5-55-M.
Code: 21204
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 55°.Marking according to GOST: P121-5-55-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5060
Marking according to GOST: P121-5-60-M.
Code: 21205
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 60°.Marking according to GOST: P121-5-60-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5065
Marking according to GOST: P121-5-65-M.
Code: 21206
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°.Marking according to GOST: P121-5-65-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5070
Marking according to GOST: P121-5-70-M.
Code: 21207
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°.Marking according to GOST: P121-5-70-M.
180 BrBuy
on order
Miniature inclined combined transducer AM5075
Marking according to GOST: P121-5-75-M.
Code: 21208
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 75°.Marking according to GOST: P121-5-75-M.
180 BrBuy
on order
Miniature angle-beam combined transducer AM5090
Marking according to GOST: P121-5-90-M.
Code: 21209
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 90°.Marking according to GOST: P121-5-90-M.
180 BrBuy
on order
Small-sized inclined combined transducer AN4030
Marking according to GOST: P121-4-30-M.
Code: 22600
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 30°.Marking according to GOST: P121-4-30-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4040
Marking according to GOST: P121-4-40-M.
Code: 22601
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 40°.Marking according to GOST: P121-4-40-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4045
Marking according to GOST: P121-4-45-M.
Code: 22602
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 45°.Marking according to GOST: P121-4-45-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4050
Marking according to GOST: P121-4-50-M.
Code: 22603
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 50°.Marking according to GOST: P121-4-50-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4055
Marking according to GOST: P121-4-55-M.
Code: 22604
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 55°.Marking according to GOST: P121-4-55-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4060
Marking according to GOST: P121-4-60-M.
Code: 22605
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 60°.Marking according to GOST: P121-4-60-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4065
Marking according to GOST: P121-4-65-M.
Code: 22606
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 65°.Marking according to GOST: P121-4-65-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4070
Marking according to GOST: P121-4-70-M.
Code: 22607
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 70°.Marking according to GOST: P121-4-70-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4075
Marking according to GOST: P121-4-75-M.
Code: 22608
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 75°.Marking according to GOST: P121-4-75-M.
169 BrBuy
on order
Small-sized inclined combined transducer AN4090
Marking according to GOST: P121-4-90-M.
Code: 22609
Frequency 4 MHz, piezoelectric element size 8x9 mm, input angle 90°.Marking according to GOST: P121-4-90-M.
169 BrBuy
on order
Small-sized inclined combined transducer ANGR5040
Marking according to GOST: P121-5-40-AM-004.
Code: 15241
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 40°.Marking according to GOST: P121-5-40-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5045
Marking according to GOST: P121-5-45-AM-004.
Code: 15242
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 45°.Marking according to GOST: P121-5-45-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5050
Marking according to GOST: P121-5-50-AM-004.
Code: 15243
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 50°.Marking according to GOST: P121-5-50-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5055
Marking according to GOST: P121-5-55-AM-004.
Code: 15244
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 55°.Marking according to GOST: P121-5-55-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5060
Marking according to GOST: P121-5-60-AM-004.
Code: 15245
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 60°.Marking according to GOST: P121-5-60-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5065
Marking according to GOST: P121-5-65-AM-004.
Code: 15246
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 65°.Marking according to GOST: P121-5-65-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5070
Marking according to GOST: P121-5-70-AM-004.
Code: 15247
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 70°.Marking according to GOST: P121-5-70-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5075
Marking according to GOST: P121-5-75-AM-004.
Code: 15248
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 75°.Marking according to GOST: P121-5-75-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANGR5090
Marking according to GOST: P121-5-90-AM-004.
Code: 15249
Frequency 5 MHz, piezoelectric element diameter 6 mm, input angle 90°.Marking according to GOST: P121-5-90-AM-004.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5040
Marking according to GOST: P121-5-40-AM-001.
Code: 15211
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 40°.Marking according to GOST: P121-5-40-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5045
Marking according to GOST: P121-5-45-AM-001.
Code: 15212
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 45°.Marking according to GOST: P121-5-45-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5050
Marking according to GOST: P121-5-50-AM-001.
Code: 15213
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 50°.Marking according to GOST: P121-5-50-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5055
Marking according to GOST: P121-5-55-AM-001.
Code: 15214
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 55°.Marking according to GOST: P121-5-55-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5060
Marking according to GOST: P121-5-60-AM-001.
Code: 15215
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 60°.Marking according to GOST: P121-5-60-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5065
Marking according to GOST: P121-5-65-AM-001.
Code: 15216
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 65°.Marking according to GOST: P121-5-65-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5070
Marking according to GOST: P121-5-70-AM-001.
Code: 15217
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 70°.Marking according to GOST: P121-5-70-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5075
Marking according to GOST: P121-5-75-AM-001.
Code: 15218
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 75°.Marking according to GOST: P121-5-75-AM-001.
180 BrBuy
on order
Small-sized inclined combined transducer ANG5090
Marking according to GOST: P121-5-90-AM-001.
Code: 15219
Frequency 5 MHz, piezoelectric element size 5x10 mm, input angle 90°.Marking according to GOST: P121-5-90-AM-001.
180 BrBuy
on order
Miniature inclined combined transducer AZ5040
Marking according to GOST: P121-5-40-MM.
Code: 25521
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the input angle is 40°.Marking according to GOST: P121-5-40-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ5050
Marking according to GOST: P121-5-50-MM.
Code: 25523
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 50°.Marking according to GOST: P121-5-50-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ5060
Marking according to GOST: P121-5-60-MM.
Code: 25525
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 60°.Marking according to GOST: P121-5-60-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ5065
Marking according to GOST: P121-5-65-MM.
Code: 25526
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°.Marking according to GOST: P121-5-65-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ5070
Marking according to GOST: P121-5-70-MM.
Code: 25527
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°.Marking according to GOST: P121-5-70-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ5075
Marking according to GOST: P121-5-75-MM.
Code: 25528
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 75°.Marking according to GOST: P121-5-75-MM.
229 BrBuy
on order
Miniature angle-beam combined transducer AZ5090
Marking according to GOST: P121-5-90-MM.
Code: 25528
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 90°.Marking according to GOST: P121-5-90-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ1040
Marking according to GOST: P121-10-40-MM.
Code: 25551
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 40°.Marking according to GOST: P121-10-40-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ1050
Marking according to GOST: P121-10-50-MM.
Code: 25553
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 50°.Marking according to GOST: P121-10-50-MM.
229 BrBuy
on order
Miniature inclined combined transducer AZ1060
Marking according to GOST: P121-10-60-MM.
Code: 25555
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 60°.Marking according to GOST: P121-10-60-MM.
229 BrBuy
on order
Miniature inclined coupled transducer AZ1065
Marking according to GOST: P121-10-65-MM.
Code: 25556
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 65°.Marking according to GOST: P121-10-65-MM.
229 BrBuy
on order
Miniature inclined coupled transducer AZ1070
Marking according to GOST: P121-10-70-MM.
Code: 25557
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 70°.Marking according to GOST: P121-10-70-MM.
229 BrBuy
on order
Miniature inclined coupled transducer AZ1075
Marking according to GOST: P121-10-75-MM.
Code: 25558
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 75°.Marking according to GOST: P121-10-75-MM.
229 BrBuy
on order
Miniature angle-beam combined transducer AZ1090
Marking according to GOST: P121-10-90-MM.
Code: 25559
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 90°.Marking according to GOST: P121-10-90-MM.
229 BrBuy
on order
Miniature inclined combined transducer AM5070J022
Marking in accordance with GOST: P121-5-70-M-D22.
Code: 4575022
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 22 mm.Marking in accordance with GOST: P121-5-70-M-D22.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J025
Marking according to GOST: P121-5-70-M-D25.
Code: 4575025
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, grinding diameter 25 mm.Marking according to GOST: P121-5-70-M-D25.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J028
Marking in accordance with GOST: P121-5-70-M-D28.
Code: 4575028
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 28 mm.Marking in accordance with GOST: P121-5-70-M-D28.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J032
Marking according to GOST: P121-5-70-M-D32.
Code: 4575032
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, grinding diameter 32 mm.Marking according to GOST: P121-5-70-M-D32.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J038
Marking in accordance with GOST: P121-5-70-M-D38.
Code: 4575038
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 38 mm.Marking in accordance with GOST: P121-5-70-M-D38.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J042
Marking in accordance with GOST: P121-5-70-M-D42.
Code: 4575042
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 42 mm.Marking in accordance with GOST: P121-5-70-M-D42.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J045
Marking in accordance with GOST: P121-5-70-M-D45.
Code: 4575045
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 45 mm.Marking in accordance with GOST: P121-5-70-M-D45.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J048
Marking in accordance with GOST: P121-5-70-M-D48.
Code: 4575048
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 48 mm.Marking in accordance with GOST: P121-5-70-M-D48.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J050
Marking in accordance with GOST: P121-5-70-M-D50.
Code: 4575050
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 50 mm.Marking in accordance with GOST: P121-5-70-M-D50.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J057
Marking according to GOST: P121-5-70-M-D57.
Code: 4575057
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, lapping diameter 57 mm.Marking according to GOST: P121-5-70-M-D57.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J060
Marking in accordance with GOST: P121-5-70-M-D60.
Code: 4575060
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 60 mm.Marking in accordance with GOST: P121-5-70-M-D60.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J076
Marking according to GOST: P121-5-70-M-D76.
Code: 4575076
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, grinding diameter 76 mm.Marking according to GOST: P121-5-70-M-D76.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J089
Marking according to GOST: P121-5-70-M-D89.
Code: 4575089
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, grinding diameter 89 mm.Marking according to GOST: P121-5-70-M-D89.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J108
Marking according to GOST: P121-5-70-M-D108.
Code: 4575108
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, lapping diameter 108 mm.Marking according to GOST: P121-5-70-M-D108.
193 BrBuy
on order
Miniature inclined coupled transducer AM5070J114
Marking in accordance with GOST: P121-5-70-M-D114.
Code: 4575114
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 114 mm.Marking in accordance with GOST: P121-5-70-M-D114.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J133
Marking in accordance with GOST: P121-5-70-M-D133.
Code: 4575133
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 133 mm.Marking in accordance with GOST: P121-5-70-M-D133.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J159
Marking according to GOST: P121-5-70-M-D159.
Code: 4575159
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, grinding diameter 159 mm.Marking according to GOST: P121-5-70-M-D159.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J219
Marking according to GOST: P121-5-70-M-D219.
Code: 4575219
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 70°, grinding diameter 219 mm.Marking according to GOST: P121-5-70-M-D219.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J273
Marking in accordance with GOST: P121-5-70-M-D273.
Code: 4575273
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 273 mm.Marking in accordance with GOST: P121-5-70-M-D273.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J325
Marking in accordance with GOST: P121-5-70-M-D325.
Code: 4575325
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 325 mm.Marking in accordance with GOST: P121-5-70-M-D325.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J377
Marking in accordance with GOST: P121-5-70-M-D377.
Code: 4575377
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 377 mm.Marking in accordance with GOST: P121-5-70-M-D377.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J426
Marking in accordance with GOST: P121-5-70-M-D426.
Code: 4575426
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 426 mm.Marking in accordance with GOST: P121-5-70-M-D426.
193 BrBuy
on order
Miniature inclined combined transducer AM5070J530
Marking in accordance with GOST: P121-5-70-M-D530.
Code: 4575530
The frequency is 5 MHz, the size of the piezoelectric element is 5x5 mm, the angle of entry is 70°, the lapping diameter is 530 mm.Marking in accordance with GOST: P121-5-70-M-D530.
193 BrBuy
on order
Inclined combined transducer AN5070J032
Marking according to GOST: P121-5-70-D32.
Code: 3770032
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 32 mm.Marking according to GOST: P121-5-70-D32.
193 BrBuy
on order
Inclined combined transducer AN5070J038
Marking according to GOST: P121-5-70-D38.
Code: 3770038
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 38 mm.Marking according to GOST: P121-5-70-D38.
193 BrBuy
on order
Inclined combined transducer AN5070J048
Marking according to GOST: P121-5-70-D48.
Code: 3770048
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 48 mm.Marking according to GOST: P121-5-70-D48.
193 BrBuy
on order
Inclined combined transducer AN5070J057The frequency is 5 MHz, the size of the piezoelectric element is 8x9 mm, the input angle is 70°, the grinding diameter is 57 mm.
Marking according to GOST: P121-5-70-D57.
Marking according to GOST: P121-5-70-D57.
193 BrBuy
on order
Inclined combined transducer AN5070J060
Marking according to GOST: P121-5-70-D60.
Code: 3770060
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 60 mm.Marking according to GOST: P121-5-70-D60.
193 BrBuy
on order
Inclined combined transducer AN5070J089
Marking according to GOST: P121-5-70-D89.
Code: 3770089
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 89 mm.Marking according to GOST: P121-5-70-D89.
193 BrBuy
on order
Inclined combined transducer AN5070J100
Marking according to GOST: P121-5-70-D100.
Code: 3770100
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 100 mm.Marking according to GOST: P121-5-70-D100.
193 BrBuy
on order
Inclined combined transducer AN5070J108
Marking according to GOST: P121-5-70-D108.
Code: 3770108
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 108 mm.Marking according to GOST: P121-5-70-D108.
193 BrBuy
on order
Angle-beam combined transducer AN5070J114
Code: 3770114
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 114 mm. Marking according to GOST: P121-5-70-D114.193 BrBuy
on order
Inclined combined transducer AN5070J133
Marking according to GOST: P121-5-70-D133.
Code: 3770133
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, lapping diameter 133 mm.Marking according to GOST: P121-5-70-D133.
193 BrBuy
on order
Inclined combined transducer AN5070J159
Marking according to GOST: P121-5-70-D159.
Code: 3770159
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 159 mm.Marking according to GOST: P121-5-70-D159.
193 BrBuy
on order
Inclined combined transducer AN5070J219
Marking according to GOST: P121-5-70-D219.
Code: 3770219
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 219 mm.Marking according to GOST: P121-5-70-D219.
193 BrBuy
on order
Inclined combined transducer AN5070J273
Marking according to GOST: P121-5-70-D273.
Code: 3770273
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 273 mm.Marking according to GOST: P121-5-70-D273.
193 BrBuy
on order
Inclined combined transducer AN5070J325
Marking according to GOST: P121-5-70-D325.
Code: 3770325
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 70°, grinding diameter 325 mm.Marking according to GOST: P121-5-70-D325.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J032
Marking according to GOST: P121-5-65-M-D32.
Code: 4565032
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, grinding diameter 32 mm.Marking according to GOST: P121-5-65-M-D32.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J038
Marking according to GOST: P121-5-65-M-D38.
Code: 4565038
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 38 mm.Marking according to GOST: P121-5-65-M-D38.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J042
Marking according to GOST: P121-5-65-M-D42.
Code: 4565042
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 42 mm.Marking according to GOST: P121-5-65-M-D42.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J045
Marking according to GOST: P121-5-65-M-D45.
Code: 4565045
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 45 mm.Marking according to GOST: P121-5-65-M-D45.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J048
Marking according to GOST: P121-5-65-M-D48.
Code: 4565048
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 48 mm.Marking according to GOST: P121-5-65-M-D48.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J057
Marking according to GOST: P121-5-65-M-D57.
Code: 4565057
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 57 mm.Marking according to GOST: P121-5-65-M-D57.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J060
Marking according to GOST: P121-5-65-M-D60.
Code: 4565060
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 60 mm.Marking according to GOST: P121-5-65-M-D60.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J076
Marking according to GOST: P121-5-65-M-D76.
Code: 4565076
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, grinding diameter 76 mm.Marking according to GOST: P121-5-65-M-D76.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J089
Marking according to GOST: P121-5-65-M-D89.
Code: 4565089
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 89 mm.Marking according to GOST: P121-5-65-M-D89.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J108
Marking according to GOST: P121-5-65-M-D108.
Code: 4565108
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 108 mm.Marking according to GOST: P121-5-65-M-D108.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J114
Marking according to GOST: P121-5-65-M-D114.
Code: 4565114
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, grinding diameter 114 mm.Marking according to GOST: P121-5-65-M-D114.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J133
Marking according to GOST: P121-5-65-M-D133.
Code: 4565133
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, grinding diameter 133 mm.Marking according to GOST: P121-5-65-M-D133.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J159
Marking according to GOST: P121-5-65-M-D159.
Code: 4565159
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, grinding diameter 159 mm.Marking according to GOST: P121-5-65-M-D159.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J325
Marking according to GOST: P121-5-65-M-D325.
Code: 4565325
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, grinding diameter 325 mm.Marking according to GOST: P121-5-65-M-D325.
193 BrBuy
on order
Miniature inclined combined transducer AM5065J426
Marking according to GOST: P121-5-65-M-D426.
Code: 4565426
Frequency 5 MHz, piezoelectric element size 5x5 mm, input angle 65°, lapping diameter 426 mm.Marking according to GOST: P121-5-65-M-D426.
193 BrBuy
on order
Inclined combined transducer AN5050B060
Marking according to GOST: P121-5-50-D60.
Code: 4450060
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 60 mm.Marking according to GOST: P121-5-50-D60.
193 BrBuy
on order
Inclined combined transducer AN5050B066
Marking according to GOST: P121-5-50-D66.
Code: 4450066
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 66 mm.Marking according to GOST: P121-5-50-D66.
193 BrBuy
on order
Inclined combined transducer AN5050B076
Marking according to GOST: P121-5-50-D76.
Code: 4450076
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 76 mm.Marking according to GOST: P121-5-50-D76.
193 BrBuy
on order
Inclined combined transducer AN5050B089
Marking according to GOST: P121-5-50-D89.
Code: 4450089
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, grinding diameter 89 mm.Marking according to GOST: P121-5-50-D89.
193 BrBuy
on order
Inclined combined transducer AN5050B108
Marking according to GOST: P121-5-50-D108.
Code: 4450108
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 108 mm.Marking according to GOST: P121-5-50-D108.
193 BrBuy
on order
Inclined combined transducer AN5050B114
Marking according to GOST: P121-5-50-D114.
Code: 4450114
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 114 mm.Marking according to GOST: P121-5-50-D114.
193 BrBuy
on order
Inclined combined ground-in transducer AN5050B133
Marking according to GOST: P121-5-50-D133.
Code: 4450133
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 133 mm.Marking according to GOST: P121-5-50-D133.
193 BrBuy
on order
Inclined combined transducer AN5050B159
Marking according to GOST: P121-5-50-D159.
Code: 4450159
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, grinding diameter 159 mm.Marking according to GOST: P121-5-50-D159.
193 BrBuy
on order
Inclined combined transducer AN5050B219
Marking according to GOST: P121-5-50-D219.
Code: 4450219
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 219 mm.Marking according to GOST: P121-5-50-D219.
193 BrBuy
on order
Inclined combined transducer AN5050B273
Marking according to GOST: P121-5-50-D273.
Code: 4450273
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 273 mm.Marking according to GOST: P121-5-50-D273.
193 BrBuy
on order
Inclined combined transducer AN5050B325
Marking according to GOST: P121-5-50-D325.
Code: 4450325
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 325 mm.Marking according to GOST: P121-5-50-D325.
193 BrBuy
on order
Inclined combined transducer AN5040B060
Marking according to GOST: P121-5-40-D60.
Code: 4440060
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 60 mm.Marking according to GOST: P121-5-40-D60.
193 BrBuy
on order
Inclined combined transducer AN5040B066
Marking according to GOST: P121-5-40-D66.
Code: 4440066
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 66 mm.Marking according to GOST: P121-5-40-D66.
193 BrBuy
on order
Inclined combined transducer AN5040B076
Marking according to GOST: P121-5-40-D76.
Code: 4440076
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 76 mm.Marking according to GOST: P121-5-40-D76.
193 BrBuy
on order
Inclined combined transducer AN5040B089
Marking according to GOST: P121-5-40-D89.
Code: 4440089
P121-5-40-D76 Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 89 mm.Marking according to GOST: P121-5-40-D89.
193 BrBuy
on order
Inclined combined transducer AN5040B108
Marking according to GOST: P121-5-40-D108.
Code: 4440108
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 108 mm.Marking according to GOST: P121-5-40-D108.
193 BrBuy
on order
Inclined combined transducer AN5040B114
Marking according to GOST: P121-5-40-D114.
Code: 4440114
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 114 mm.Marking according to GOST: P121-5-40-D114.
193 BrBuy
on order
Inclined combined transducer AN5040B133
Marking according to GOST: P121-5-40-D133.
Code: 4440133
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 133 mm.Marking according to GOST: P121-5-40-D133.
193 BrBuy
on order
Inclined combined transducer AN5040B159
Marking according to GOST: P121-5-40-D159.
Code: 4440159
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 159 mm.Marking according to GOST: P121-5-40-D159.
193 BrBuy
on order
Inclined combined transducer AN5040B219
Marking according to GOST: P121-5-40-D219.
Code: 4440219
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 219 mm.Marking according to GOST: P121-5-40-D219.
193 BrBuy
on order
Inclined combined transducer AN5040B273
Marking according to GOST: P121-5-40-D273.
Code: 4440273
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 273 mm.Marking according to GOST: P121-5-40-D273.
193 BrBuy
on order
Inclined combined transducer AN5040B325
Marking according to GOST: P121-5-40-D325.
Code: 4440325
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 325 mm.Marking according to GOST: P121-5-40-D325.
193 BrBuy
on order
Inclined combined transducer AN5040B377
Marking according to GOST: P121-5-40-D377.
Code: 4440377
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 377 mm.Marking according to GOST: P121-5-40-D377.
193 BrBuy
on order
Inclined combined transducer AN5040B426
Marking according to GOST: P121-5-40-D426.
Code: 4440426
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 40°, lapping diameter 426 mm.Marking according to GOST: P121-5-40-D426.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B066
Marking according to GOST: P121-2.5-40-D66.
Code: 4240066
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 66 mm.Marking according to GOST: P121-2.5-40-D66.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B076
Marking according to GOST: P121-2.5-40-D76.
Code: 4240076
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 76 mm.Marking according to GOST: P121-2.5-40-D76.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B089
Marking according to GOST: P121-2.5-40-D89.
Code: 4240089
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 89 mm.Marking according to GOST: P121-2.5-40-D89.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B108
Marking according to GOST: P121-2.5-40-D108.
Code: 4240108
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 108 mm.Marking according to GOST: P121-2.5-40-D108.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B114
Marking according to GOST: P121-2.5-40-D114.
Code: 4240114
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 114 mm.Marking according to GOST: P121-2.5-40-D114.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B133
Marking according to GOST: P121-2.5-40-D133.
Code: 4240133
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 133 mm.Marking according to GOST: P121-2.5-40-D133.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B159
Marking according to GOST: P121-2.5-40-D159.
Code: 4240159
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 159 mm.Marking according to GOST: P121-2.5-40-D159.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B219
Marking according to GOST: P121-2.5-40-D219.
Code: 4240219
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 219 mm.Marking according to GOST: P121-2.5-40-D219.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B245
Marking according to GOST: P121-2.5-40-D245.
Code: 4240245
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 245 mm.Marking according to GOST: P121-2.5-40-D245.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B273
Marking according to GOST: P121-2.5-40-D273.
Code: 4240273
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 273 mm.Marking according to GOST: P121-2.5-40-D273.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B325
Marking according to GOST: P121-2.5-40-D325.
Code: 4240325
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 325 mm.Marking according to GOST: P121-2.5-40-D325.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B377
Marking according to GOST: P121-2.5-40-D377.
Code: 4240377
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 377 mm.Marking according to GOST: P121-2.5-40-D377.
193 BrBuy
on order
Inclined combined ground-in transducer AN2540B426
Marking according to GOST: P121-2.5-40-D426.
Code: 4240426
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 40°, grinding diameter 426 mm.Marking according to GOST: P121-2.5-40-D426.
193 BrBuy
on order
Inclined combined transducer AN5065J068
Marking according to GOST: P121-5-65-D068.
Code: 3765068
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 68 mm.Marking according to GOST: P121-5-65-D068.
193 BrBuy
on order
Inclined combined transducer AN5065J089
Marking according to GOST: P121-5-65-D089.
Code: 3765089
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, grinding diameter 89 mm.Marking according to GOST: P121-5-65-D089.
193 BrBuy
on order
Inclined combined transducer AN5065J108
Marking according to GOST: P121-5-65-D108.
Code: 3765108
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 108 mm.Marking according to GOST: P121-5-65-D108.
193 BrBuy
on order
Inclined combined transducer AN5065J133
Marking according to GOST: P121-5-65-D133.
Code: 3765133
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 133 mm.Marking according to GOST: P121-5-65-D133.
193 BrBuy
on order
Inclined combined transducer AN5065J159
Marking according to GOST: P121-5-65-D159.
Code: 3765159
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 159 mm.Marking according to GOST: P121-5-65-D159.
193 BrBuy
on order
Inclined combined transducer AN5065J219
Маркировка по ГОСТ: П121-5-65-Д219.
Code: 3765219
Частота 5 МГц, размер пьезоэлемента 8х9 мм, угол ввода 65°, диаметр притирки 219 мм.Маркировка по ГОСТ: П121-5-65-Д219.
193 BrBuy
on order
Inclined combined transducer AN5065J273
Marking according to GOST: P121-5-65-D273.
Code: 3765273
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 273 mm.Marking according to GOST: P121-5-65-D273.
193 BrBuy
on order
Inclined combined transducer AN5065J325
Marking according to GOST: P121-5-65-D325.
Code: 3765325
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 325 mm.Marking according to GOST: P121-5-65-D325.
193 BrBuy
on order
Inclined combined transducer AN5065J377
Marking according to GOST: P121-5-65-D377.
Code: 3765377
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, grinding diameter 377 mm.Marking according to GOST: P121-5-65-D377.
193 BrBuy
on order
Inclined combined transducer AN5065J426
Marking according to GOST: P121-5-65-D426.
Code: 3765426
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 426 mm.Marking according to GOST: P121-5-65-D426.
193 BrBuy
on order
Inclined combined transducer AN5065J530
Marking according to GOST: P121-5-65-D530.
Code: 3765530
Frequency 5 MHz, piezoelectric element size 8x9 mm, input angle 65°, lapping diameter 530 mm.Marking according to GOST: P121-5-65-D530.
193 BrBuy
on order
Inclined fixed transducer S5096 5.0A40D6CS
Code: 1445
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element is 5 mm. Entry angle 40°.356 BrBuy
on order
Inclined fixed transducer S5096 5.0A45D6CS
Code: 1448
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element is 7 mm. Entry angle 45°.356 BrBuy
on order
Inclined fixed transducer S5096 5.0A50D6CS
Code: 1441
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element is 7 mm. Entry angle 50°.356 BrBuy
on order
Inclined fixed transducer S5096 5.0A60D6CS
Code: 1447
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element is 9 mm. Entry angle 60°.356 BrBuy
in stock
Inclined fixed transducer S5096 5.0A65D6CS
Code: 1442
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element is 9 mm. Entry angle 65°.356 BrBuy
on order
Inclined fixed transducer S5096 5.0A70D6CS
Code: 1443
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element is 9 mm. Entry angle 70°.356 BrBuy
in stock
Inclined fixed transducer S5096 5.0A72D6CS
Code: 1444
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element is 9 mm. Entry angle 72°.356 BrBuy
on order
Inclined fixed transducer S5096 5.0A90D6CR
Code: 1446
For AKC ultrasonic flaw detectors. Frequency 5.0 MHz. The diameter of the piezoelectric element on request. Entry angle 90°.356 BrBuy
on order
Inclined fixed transducer P121-2,5-65 STA10The frequency is 2.5 MHz, the size of the piezoelectric element is 14x27 mm, the angle of entry is 65 °, wear-resistant.
Marking in accordance with GOST: P121-2.5-65.
Marking in accordance with GOST: P121-2.5-65.
149 BrBuy
on order
Inclined combined transducer S5280 1,8A40D18CS
Code: 1421
Frequency: 1.8 MHz. Entry angle 40°. It is used in flaw detection. For AKC devices (P121-1.8-40).661 BrBuy
on order
Inclined combined transducer S5280 1,8A50D18CS
Code: 1422
Frequency: 1.8 MHz. Entry angle 50°. It is used in flaw detection. For AKC devices (P121-1.8-50).661 BrBuy
on order
Inclined combined transducer S5280 1,8A60D18CS
Code: 1424
Frequency: 1.8 MHz. Entry angle 60°. It is used in flaw detection. For AKC devices (P121-1.8-60).661 BrBuy
on order
Inclined combined transducer S5280 1,8А65D18CS
Code: 1423
Frequency: 1.8 MHz. Entry angle 65°. It is used in flaw detection. For AKC devices (P121-1.8-65).661 BrBuy
on order
Inclined combined transducer S5182 2,5A40D12CS
Code: 1431
Frequency: 2.5 MHz. Entry angle 40°. It is used in flaw detection. For AKC devices (P121-2.5-40).390 BrBuy
on order
Inclined combined transducer S5182 2,5A50D12CS
Code: 1432
Frequency: 2.5 MHz. Entry angle 50°. It is used in flaw detection. For AKC devices (P121-2.5-50).390 BrBuy
on order
Inclined combined transducer S5182 2,5А60D12CS
Code: 1433
Frequency: 2.5 MHz. Entry angle 60°. It is used in flaw detection. For AKС devices (P121-2.5-60).390 BrBuy
on order
Inclined combined transducer S5182 2.5А65D12CS
Code: 1434
Frequency: 2.5 MHz. Entry angle 65°. It is used in flaw detection. For AKC devices (P121-2.5-65).390 BrBuy
on order
Inclined combined transducer S5182 2.5А70D12CS
Code: 1435
Frequency: 2.5 MHz. Entry angle 70°. It is used in flaw detection. For AKC devices (P121-2.5-70).390 BrBuy
on order
Inclined combined transducer S5182 2.5А90D12CS
Code: 1436
Frequency: 2.5 MHz. Entry angle 90°. It is used in flaw detection. For AKC devices (P121-2.5-90).390 BrBuy
on order
Oblique combined ground-in transducer AN2565J024
Marking according to GOST: P121-2.5-65-D24.
Code: 4365024
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 24 mm. Marking according to GOST: P121-2.5-65-D24.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J030
Marking according to GOST: P121-2.5-65-D30.
Code: 4365030
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 30 mm. Marking according to GOST: P121-2.5-65-D30.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J036
Marking according to GOST: P121-2.5-65-D36.
Code: 4365036
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 36 mm. Marking according to GOST: P121-2.5-65-D36.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J040
Marking according to GOST: P121-2.5-65-D40.
Code: 4365040
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 40 mm. Marking according to GOST: P121-2.5-65-D40.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J066
Marking according to GOST: P121-2.5-65-D66.
Code: 4365066
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 66 mm. Marking according to GOST: P121-2.5-65-D66.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J076
Marking according to GOST: P121-2.5-65-D76.
Code: 4365076
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 76 mm. Marking according to GOST: P121-2.5-65-D76.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J084
Marking according to GOST: P121-2.5-65-D84.
Code: 4365084
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 84 mm. Marking according to GOST: P121-2.5-65-D84.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J089
Marking according to GOST: P121-2.5-65-D89.
Code: 4365089
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 89 mm. Marking according to GOST: P121-2.5-65-D89.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J108
Marking according to GOST: P121-2.5-65-D108.
Code: 4365108
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 108 mm. Marking according to GOST: P121-2.5-65-D108.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J114
Marking according to GOST: P121-2.5-65-D114.
Code: 4365114
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 114 mm. Marking according to GOST: P121-2.5-65-D114.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J133
Marking according to GOST: P121-2.5-65-D133.
Code: 4365133
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 133 mm. Marking according to GOST: P121-2.5-65-D133.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J159
Marking according to GOST: P121-2.5-65-D159.
Code: 4365159
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 159 mm. Marking according to GOST: P121-2.5-65-D159.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J219
Marking according to GOST: P121-2.5-65-D219.
Code: 4365219
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 219 mm. Marking according to GOST: P121-2.5-65-D219.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J273
Marking according to GOST: P121-2.5-65-D273.
Code: 4365273
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 273 mm. Marking according to GOST: P121-2.5-65-D273.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J325
Marking according to GOST: P121-2.5-65-D325.
Code: 4365325
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 325 mm. Marking according to GOST: P121-2.5-65-D325.
193 BrBuy
on order
Oblique combined ground-in transducer AN2565J524
Marking according to GOST: P121-2.5-65-D524.
Code: 4365524
The frequency is 2.5 MHz, the size of the piezoelectric element is 8x9 mm, the angle of entry is 65°, the lapping diameter is 524 mm. Marking according to GOST: P121-2.5-65-D524.
193 BrBuy
on order
Oblique combined groud-in transducer AN2550B066
Marking according to GOST: P121-2.5-50-D66.
Code: 4250066
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 66 mm.Marking according to GOST: P121-2.5-50-D66.
193 BrBuy
on order
Oblique combined groud-in transducer AN2550B108
Marking according to GOST: P121-2.5-50-D108.
Code: 4250108
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 108 mm.Marking according to GOST: P121-2.5-50-D108.
193 BrBuy
on order
Oblique combined groud-in transducer AN2550B133
Marking according to GOST: P121-2.5-50-D133.
Code: 4250133
Frequency 2.5 MHz, piezoelectric element size 8x9 mm, input angle 50°, lapping diameter 133 mm.Marking according to GOST: P121-2.5-50-D133.
193 BrBuy
on order
Miniature inclined combined transducer AM1070J057
Marking according to GOST: P121-10-70-M-D57.
Code: 4170057
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 70°, lapping diameter 57 mm.Marking according to GOST: P121-10-70-M-D57.
193 BrBuy
on order
Miniature inclined combined transducer AM1070J089
Marking according to GOST: P121-10-70-M-D89.
Code: 4170089
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 70°, lapping diameter 89 mm.Marking according to GOST: P121-10-70-M-D89.
193 BrBuy
on order
Miniature inclined combined transducer AM1070J0108
Marking according to GOST: P121-10-70-M-D108.
Code: 4170108
Frequency 10 MHz, piezoelectric element size 4x4 mm, input angle 70°, lapping diameter 108 mm.Marking according to GOST: P121-10-70-M-D108.
193 BrBuy
on order
Inclined separate-combined transducer AD2540
Code: 24461
Inclined separate-combined shear-wave transducer of "Duet" type. Frequency 2.5 MHz, input angle 40°, piezoelectric element size 12x7.5 mm (P122-2.5-40).234 BrBuy
on order
Inclined separate-combined transducer AD2550
Code: 24463
Inclined separate-combined shear-wave transducer of "Duet" type. Frequency 2.5 MHz, input angle 50°, piezoelectric element size 12x7.5 mm (P122-2.5-50).234 BrBuy
on order
Inclined separate-combined transducer AD2560
Code: 24465
Inclined separate-combined shear-wave transducer of "Duet" type. Frequency 2.5 MHz, input angle 60°, piezoelectric element size 12x7.5 mm (P122-2.5-60).234 BrBuy
on order
Inclined separate-combined transducer AD2565
Code: 24466
Inclined separate-combined shear-wave transducer of "Duet" type. Frequency 2.5 MHz, input angle 65°, piezoelectric element size 12x7.5 mm (P122-2.5-65).234 BrBuy
on order
Inclined separate-combined transducer AD2570
Code: 24467
Inclined separate-combined shear-wave transducer of "Duet" type. Frequency 2.5 MHz, input angle 70°, piezoelectric element size 12x7.5 mm (P122-2.5-70).234 BrBuy
on order
Inclined separate-combined transducer AD2575
Code: 24468
Inclined separate-combined shear-wave transducer of "Duet" type. Frequency 2.5 MHz, input angle 75°, piezoelectric element size 12x7.5 mm (P122-2.5-75).234 BrBuy
on order
Inclined separate-combined transducer AD5040
Code: 24451
Medium-sized separate-combined shear wave transducer of the "Duet" type. Frequency 5 MHz, input angle 40°, piezoelectric element size 9x5 mm (P122-5-40).234 BrBuy
on order
Inclined separate-combined transducer AD5050
Code: 24453
Medium-sized separate-combined shear wave transducer of the "Duet" type. Frequency 5 MHz, input angle 50°, piezoelectric element size 9x5 mm (P122-5-50).234 BrBuy
on order
Inclined separate-combined transducer AD5060
Marking according to GOST: P121-5-60-A-001.
Code: 24455
Frequency 5 MHz, piezoelectric element size 12x16 mm, input angle 60°.Marking according to GOST: P121-5-60-A-001.
234 BrBuy
on order
Inclined separate-combined transducer AD5065
Code: 24456
Medium-sized separate-combined shear wave transducer of the "Duet" type. Frequency 5 MHz, input angle 65°, piezoelectric element size 9x5 mm (P122-5-65).234 BrBuy
on order
Inclined separate-combined transducer AD5070
Code: 24457
Medium-sized separate-combined shear wave transducer of the "Duet" type. Frequency 5 MHz, input angle 70°, piezoelectric element size 9x5 mm (P122-5-70).234 BrBuy
on order
Inclined separate-combined transducer AD5075
Code: 24458
Medium-sized separate-combined shear wave transducer of the "Duet" type. Frequency 5 MHz, input angle 75°, piezoelectric element size 9x5 mm (P122-5-75).234 BrBuy
on order
Inclined separate-combined transducer ADL1870SMedium-sized separate-combined head wave transducer. Frequency 1.8 MHz, input angle 70° (P122-1.8-70-VG).
317 BrBuy
on order
Inclined separate-combined transducer ADL2550S
Code: 99071
Medium-sized separate-combined head wave transducer. Frequency 2.5 MHz, input angle 50° (P122-2.5-50-PVS).317 BrBuy
on order
Inclined separate-combined transducer ADL2560SMedium-sized separate-combined head wave transducer. Frequency 2.5 MHz, input angle 60° (P122-2.5-60-PVS).
317 BrBuy
on order
Oblique dual element tandem transducer ADR1245KT70For control of the welded joint of MCP NPP according to PNAE G-7-030-91: specialized inclined RS-transducers "root tandem" of the PC-45-1.2 KT type. Entry angle: 45°, shear waves, ultrasonic frequency 1.2 MHz.
837 BrBuy
on order
Low-frequency small-sized transducer LSA412
Code: 62036
Ultrasonic contact low-frequency separate transducer for shadow control method. Frequency 400 Hz.576 BrBuy
on order
Low-frequency transducer LS220
Marking according to GOST P113-0.2-20.
Code: 61857
The frequency is 200 kHz, the diameter of the piezoelectric element is 20 mm. For shadow control method. Replaceable polyurethane protector. Marking according to GOST P113-0.2-20.
576 BrBuy
on order
Low-frequency small-sized transducer LS814
Marking according to GOST P113-0.8-14.
Code: 61895
The frequency is 800 kHz, the diameter of the piezoelectric element is 14 mm. For shadow control method. Replaceable silicone protector. Marking according to GOST P113-0.8-14.
576 BrBuy
on order
Low-frequency small-sized transducer LS1214
Marking according to GOST P113-1.25-14.
Code: 61925
The frequency is 1.25 MHz, the diameter of the piezoelectric element is 14 mm. For shadow control method. Replaceable silicone protector. Marking according to GOST P113-1.25-14.
576 BrBuy
on order
Low-frequency small-sized transducer LS1814
Marking according to GOST P113-1.8-14.
Code: 61935
The frequency is 1.8 MHz, the diameter of the piezoelectric element is 14 mm. For shadow control method. Replaceable silicone protector. Marking according to GOST P113-1.8-14.
576 BrBuy
on order
Immersion transducer IPLM1506
Code: 15940
Unfocused immersion transducer 15 MHz. Analogue of IPM-1502-VHR from Technisonic.1 506 BrBuy
on order
Immersion transducer IPLM1506FP13
Code: 15941
Spot-focused, 13 mm focal length. Frequency 15 MHz. Analogue of IPM-1502-VHR from Technisonic.1 669 BrBuy
on order
Immersion transducer IPLM1506FL13
Code: 15942
Line-focused, 13 mm focal length. Frequency 15 MHz. Analogue of IPM-1502-VHR from Technisonic.1 669 BrBuy
on order
Immersion transducer IPLM1506FP66
Code: 15943
Spot-focused, 66 mm focal length. Frequency 15 MHz. Analogue of IPM-1502-VHR from Technisonic.1 669 BrBuy
on order
Immersion transducer IPLM1006
Code: 15930
Unfocused immersion transducer 10 MHz. Analogue of IPM-1002-VHR from Technisonic.1 506 BrBuy
on order
Immersion transducer IPLM1006FP13
Code: 15931
Focused to a point. Focal length 13 mm. Frequency 10 MHz. Analogue of IPM-1002-VHR from Technisonic.1 669 BrBuy
on order
Immersion transducer IPLM1006FL13
Code: 15932
Focused in line. Focal length 13 mm. Frequency 10 MHz. Analogue of IPM-1002-VHR from Technisonic.1 669 BrBuy
on order
Immersion transducer IPLM1006FP66
Code: 15933
Focused to a point. Focal length 66 mm. Frequency 10 MHz. Analogue of IPM-1002-VHR from Technisonic.1 669 BrBuy
on order
Immersion transducer IPL1006
Code: 15910
Unfocused immersion transducer 10 MHz. Analogue of V312-SM from Olympus.1 058 BrBuy
on order
Immersion transducer IPL1006FP13
Code: 15911
Spot-focused, 13mm focal length. Frequency 10 MHz. Analogue of V312-SM from Olympus.1 180 BrBuy
on order
Immersion transducer IPL1006FL13
Code: 15912
Line-focused, 13mm focal length. Frequency 10 MHz. Analogue of V312-SM from Olympus.1 180 BrBuy
on order
Immersion transducer IPL1506
Code: 15920
Unfocused immersion transducer 15 MHz. Analogue of V313-SM from Olympus.1 201 BrBuy
on order
Immersion transducer IPL1506FP13
Code: 15921
Spot-focused, 13mm focal length. Frequency 15 MHz. Analogue of V313-SM from Olympus.1 321 BrBuy
on order
Immersion transducer IPL1506FL13
Code: 15922
Line-focused, 13mm focal length. Frequency 15 MHz. Analogue of V313-SM from Olympus.1 321 BrBuy
on order
Immersion transducer RFT-IP10WB5Unfocused immersion transducer 15 MHz. Analogue of 10WB5 from Karl Deutsch.
2 727 BrBuy
on order
Separate-combined transducer D790
Code: U8450002
Measuring range on steel from 1 to 500 mm, temperature range from -20°C to +500°C, frequency 5 MHz, piezoelectric element diameter 11 mm, direct connection between cable and probe.3 417 BrBuy
on order
Separate-combined transducer D791
Code: U8450010
Measuring range from 1.0 to 500 mm. Temperature range from -20°C to +500°C, frequency 5 MHz, piezoelectric element diameter 11 mm, cable and probe connection 90°.3 704 BrBuy
on order
Separate-combined transducer D792
Code: U8450012
Measuring range from 0.5 to 25 mm. Temperature range from 0°C to +50°C, frequency 10 MHz, piezoelectric element diameter 7.2 mm, direct connection between cable and probe.5 965 BrBuy
on order
Separate-combined transducer D797
Code: U8450016
Dual coupled transducer for Olympus thickness gauges.4 664 BrBuy
on order
Раздельно-совмещенный преобразователь D798
Code: U8450018
Раздельно-совмещенный преобразователь для толщиномеров Olympus.2 798 BrBuy
on order
Separate-combined transducer D799
Code: U8450021
Measuring range on steel from 1 to 500 mm, temperature range from -20°C to +150°C, frequency 5 MHz, piezoelectric element diameter 11 mm, cable and probe connection 90°.2 756 BrBuy
on order
Separate-combined transducer D7908
Code: U8450006
Dual coupled transducer for Olympus thickness gauges.4 200 BrBuy
on order
Separate-combined transducer D7910
Code: U8454038
Measuring range on steel from 1 to 254 mm, temperature range from 0°C to +50°C, frequency 5 MHz, piezoelectric element diameter 12.7 mm, cable and probe connection 90°.2 273 BrBuy
on order
Separate-combined transducer MTD705
Code: U8620225
Dual coupled transducer for Olympus thickness gauges.5 325 BrBuy
