The concrete cover thickness meter POISK-2.6 is designed for operational quality control of reinforcement of reinforced concrete products and structures by the eddy current method during inspection of buildings and structures, during technological control at enterprises and construction sites.

The POISK 2.6 device is used to localize areas of reinforcement before measuring the strength of concrete by various methods (ultrasonic, shock-impulse, pull-off with spalling and spalling of the rib) to eliminate errors.

Operating modes of the thickness gauge:

• determination of reinforcement projections onto the surface of the structure,
• simultaneous measurement of cover thickness and reinforcement diameter with unknown reinforcement parameters,
• measuring the thickness of the concrete cover at a known diameter,
• determination of the diameter of the reinforcement with a known cover layer,
• determination of the diameter at deep reinforcement (over 70 ... 90 mm, depending on the diameter of the reinforcement) using the standard-laying method, when the main method is inoperative.

• The eddy current method implemented in the device provides the simultaneous determination of the concrete cover thickness and the unknown reinforcement diameter without using a standard-laying, allowing to inspect structures before the concrete cover restoration with maximum accuracy and high speed even in the absence of technical documentation on them, as well as making reliable measurements on sections of structures with dense reinforcement (with a minimum spacing of the reinforcement)
• The combination of visualization of the rebar position on the instrument display, the rebar indicator light on the transducer and an acoustic tone provides the most convenient interface for real-time measurements.
• An informative high-contrast color TFT display with large viewing angles, 320x240 resolution allows you to work at temperatures down to -20 ° C.
• Menu system with quick access buttons for faster and more convenient operation
• Low consumption and built-in lithium battery guarantee long battery life and fast charging.
• LEMO connectors.
• Automated calibration of the device before taking measurements.
• Tuning to unknown steel grades with their preservation in memory.
• Archiving of 1500 results and measurement conditions, accelerated search of results in the archive by dates and numbers.
• Russian and English language of menus and text messages.
• USB connector for working with a computer and charging the battery.

• electronic unit POISK-2.6, cover;
• sensor;
• USB charger (1A);
• USB cable;
• PC communication program on "Flash business card" / CD;
• operation manual (with a mark on verification);
• a bag.

There are no reviews for this product yet.. Write the first review.