Developer ALFA P128 is a one-component, liquid developer for manual processing of industrial X-ray films of any brand, both imported and domestic.

ALFA P128 developer consists of one convenient 5 liter canister of concentrate, made of polyethylene, and can be supplied either individually or in a box containing two such canisters. One 5 liter canister of concentrate can be diluted to 20 liters of working solution.

To obtain the best results, ALFA P128 developer should be used in combination with ALFA P328 fixer.

Recommendations for dilution of ALFA R128 developer

Pour 5 liters of concentrate into a container with 15 liters of distilled or boiled and sediment-filtered water at room temperature (20°C - 30°C) and mix thoroughly. After complete mixing, we recommend waiting 3-5 minutes for air to escape before use.

IMPORTANT! The recommended temperature of the finished solution when used should be in the range from +20°C to +30°C.

Storage conditions

During storage, chemical reagents must have optimal temperature limits, which, in accordance with regulatory and technical documentation, constitute a temperature range from +5°C to +30°C. The positive temperature range for using these chemicals is primarily due to the high water content in their composition. These chemicals at low temperatures (up to -50°C) slightly change their physical and chemical properties.

If chemicals freeze, they must be thawed at room temperature and used as usual.

ATTENTION! Store in a dry, ventilated place and avoid exposure to sunlight!

Subject to the above conditions, the guaranteed shelf life is 18 months from the date of release from production.

EAEU HS code: 3707 90 200 0

• High development speed.
• Exceptional contrast of the resulting images.
• Excellent storage stability as a concentrate.
• Sustained performance in high temperature and high humidity conditions.
• Resistant to oxidation under normal operating conditions.

Брали АЛЬФУ на замену Агфе. Вполне достойный аналог 27.12.2023 г., Владислав

Write your review